18
EN
Adjusting the sound
characteristics
You can adjust the bass, treble, balance and
fader.
You can store the bass and treble levels
independently for each source.
1
Select the item you want to adjust by
pressing
(SOUND)
repeatedly.
VOL (volume)
n
SUB (subwoofer volume)
n
BAS (bass)
n
TRE (treble)
n
BAL (left-right)
n
FAD (rear-front)
2
Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
function reverts to volume control.)
Attenuating the sound
Press
(ATT)
on the rotary commander or
optional wireless remote.
“ATT on” flashes momentarily.
To restore the previous volume level, press
(ATT)
again.
Tip
The unit decreases the volume automatically when
a telephone call comes in (Telephone ATT
function).
Changing the sound and
display settings
The follow items can be set:
•Clock (page 7).
•D.Info (Dual Information) — to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•Amber/Green — to change the illumination
color to amber or green.
•Dimmer — to change the brightness of the
display.
— Select “Auto” to dim the display only
when you turn the lights on.
— Select “on” to dim the display.
— Select “off” to deactivate Dimmer.
•Contrast — to adjust the contrast if the
indications in the display are not
recognizable because of the unit‘s installed
position.
•Voice guide function for vocalized comments.
— Select “Voice 1” to minimize the volume
of the guide.
— Select “Voice 2” to increase the volume
than “Voice 1.”
— Select “Voice 3” to maximize the volume
of the guide.
— Select “Voice off” to deactivate Voice
guide.
•Beep — to turn the beep sound on or off.
•RM (Rotary Commander) — to change the
operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary
commander as the factory-set position.
— Select “rev” when you mount the rotary
commander on the right side of the
steering column.
•BBE — to enjoy bass and treble even at low
volume. The bass and treble will be
reinforced.
— Select “BBE 1” to reinforce the bass and
treble.
— Select “BBE 2” to reinforce the bass and
treble more effective than “BBE 1.”
— Select “BBE off” to deactivate BBE.
•LPF (Low Pass Filter) (page 19).
•A.Scrl (Auto Scroll) (page 9, 20).
