Sony MDS-E12 Operating Instructions Manual Download

Page: 60 / 72

Operating the MD Recor

der Using a Keyboar

Naming a Track or MD Using
the Keyboard

You can easily enter or edit names.

Short cut to the naming procedure

To give a name to a track or MD, do the following.

• To name a track

Press Num Lock while the desired track number is
displayed and the recorder is stopped, playing,
paused or recording.

• To name a MD

Press Num Lock when no track number is displayed
and the recorder is stopped.

A flashing cursor appears in the display, and the
characters can be entered.

Enter the name

For more on editing during entry, refer to the chart
below.

Press the Enter key or Num Lock key

The disc or track name is displayed from its beginning.

Operations you may wish to do while naming a
track or MD

Press

Cancel the operation

[Esc]

Switch between uppercase and

[Caps Lock] (or hold

lowercase letters

down [Shift]* while
entering letters for
uppercase)

Move the cursor

[

←

] or [

→

]

Erase the character at the cursor

[Delete]

position
Erase the character preceding

[Back Space]

the cursor

If you have assigned characters to keys using [Shift] (see page 62), the
characters you assigned have priority.

Undoing the naming of a track or MD

Press [F11]
“Name Undo?” appears.

Press [Enter].
Press [Esc] to cancel the operation.

Using the Edit Menu

Do the following to name a track or MD.

• To name a track or MD

Press [Esc] while the recorder is stopped, playing or
paused.

• To name a track during recording.

Press [Esc} during recording.

“Edit Menu” appears in the display.

Press [

↑

]/[

↓

] or [Tab]/[Shift]+[Tab] repeatedly until

“Name?” appears, then press [Enter].

While the recorder is recording, a flashing cursor
appears in the display, and you can enter a name for
the track being recorded. In this case, please go to step
5.

Press [

↑

]/[

↓

] or [Tab]/[Shift]+[Tab] repeatedly until

“Nm In?” appears, then press [Enter].

Press [

↑

]/[

↓

] or [Tab]/[Shift]+[Tab] repeatedly until

the track number (when naming a track) appears or
“Disc” (when naming the MD) flashes, then press
[Enter].

Characters can be entered.

Enter the name.

Press [Enter] or [Num Lock].

“Complete!” appears for a few seconds, and the
naming is completed.

Summary of Contents for MDS-E12









































































Search results

Summary of Contents for MDS-E12

Reviews:

Related manuals for MDS-E12

Brands by name

Popular brands

Sony MDS-E12, Operating Instructions Manual

Search results

Summary of Contents for MDS-E12

Reviews:

Related manuals for MDS-E12

Brands by name

Popular brands