Sony MDS-E12 Operating Instructions Manual Download

Page: 18 / 72

Recording on
MDs

This chapter explains the various ways to
record to an MD , as well as how to mark
track numbers and perform synchro-
recording with other components.

Recording on an MD

If the MD has recorded material on it, the recorder will
automatically start recording from the end of the recorded
portion.

POWER

LEVEL / DISPLAY / CHAR

TIME

INPUT

AMS

Turn on the mixer and program source.

Select the source on the mixer.

Press POWER to turn on the recorder.

Insert a recordable MD.

Use INPUT to select the position that corresponds to
the input jacks (connector) connected to the
program source.

If the source is connected

Display to be selected

to the connector or jacks

DIGITAL COAXIAL

COAX

ANALOG (UNBAL)

UNBAL

ANALOG (BAL)

BAL

If necessary, locate the point on the MD to start
recording from.

If you want to record on a new MD or start recording
from the end of the recorded portion, go to step 7.
•

To record over from the beginning of an existing
MD track

Turn AMS (or press

repeatedly) until the

number of the track to be recorded over appears.

•

To record over from the middle of an MD track

Turn AMS (or press

repeatedly) until the

number of the track to be recorded over appears,
then press

to start playback. Press

again at

the point you want to start recording from.

Press

The recorder changes to recording pause.

If necessary, adjust the recording level.

For details, see “Adjusting the Recording Level” on
page 21.

Press

Recording starts.

10 Start playing the program source.

Summary of Contents for MDS-E12









































































Search results

Summary of Contents for MDS-E12

Reviews:

Related manuals for MDS-E12

Brands by name

Popular brands

Sony MDS-E12, Operating Instructions Manual

Search results

Summary of Contents for MDS-E12

Reviews:

Related manuals for MDS-E12

Brands by name

Popular brands