16
Getting Started
Position of selector
Output level
+4dBu
A signal of –20 dB at the level meter
is output at the level of +4 dBu.
–10dBU
A signal of –20 dB at the level meter
is output at the level of –10 dBu.
The specifications of the BALANCE I/O connector are
shown below.
x
When connecting with digital components
(CD player, DAT recorder, other MD recorders,
mixer with a coaxial digital input connector)
When this recorder is connected with a CD player,
MD recorder, or DAT recorder, digital recording is
possible. Use a coaxial digital connecting cable that
can be purchased separately.
When the coaxial digital cable is used
MD recorder
Digital component
IN
COAXIAL
OUT
DIGITAL
DIGITAL
OUT
IN
COAXIAL
Ç
Ç
ç
: Flow of signal
z
A sampling rate converter is mounted in this recorder
All digital input signals are converted to the
sampling frequency (44.1 kHz) of an MD recorder
for recording.
Therefore, this allows you to record sources such as
32 or 48 kHz DAT or satellite broadcasts, as well as
CDs and MDs.
3
Connect the power cord.
Output terminal
XLR-3-32 equivalent
Input terminal
XLR-3-31 equivalent
1: GND
2: HOT
3: COLD
1: GND
2: HOT
3: COLD
Summary of Contents for MDS-E12
Page 5: ...5 Location and Function of Parts ...
Page 72: ...Printed in Japan ...