Sony MDDISCAM DCM-M1 Operating Instructions Manual Download

Page: 59 / 132

Editing

Checking the track information

You can check the type, recorded date, data rate, etc., of each track.

Track information display

Displaying the track information

(1)

Touch

EDIT.

Scroll the menu by touching

, or by turning the control dial.

(2)

Touch TRACK INFO.

(3)

Touch the desired track.
The track information of the track is displayed.

(4)

To close the track information display, touch CLOSE.

(5)

Touch FINISH.
After the PLEASE WAIT message, the index display appears.

To operate the menu

You can use the control dial.

To display the track information display directly

Select the track on the index display. Touch the track information at the bottom of the
screen.

Note on the data rate

The data rate only appears for movie tracks. The average rate appears for the movie
tracks recorded in the VP mode.

To check the information of other tracks

Touch CONTINUE in step 5.

Track name box

12.24.1999 1:30

0000

01:23

TRACK INFORMATION

MARK
PROTECT

8.00

Mbps

DATA RATE

EDIT

ERASE
DIVIDE
GROUP
STILL FRAME CAPTURE
INDEX IMAGE CHANGE
TRACK INFO

TRACK INFORMATION

FINISH

12.24.1999 1:30

0000

01:23

TRACK INFORMATION

MARK
PROTECT

8.00

Mbps

DATA RATE

Summary of Contents for MDDISCAM DCM-M1





































































































































Search results

Summary of Contents for MDDISCAM DCM-M1

Reviews:

Related manuals for MDDISCAM DCM-M1

Brands by name

Popular brands

Sony MDDISCAM DCM-M1, Operating Instructions Manual

Search results

Summary of Contents for MDDISCAM DCM-M1

Reviews:

Related manuals for MDDISCAM DCM-M1

Brands by name

Popular brands