Sony MDDISCAM DCM-M1 Operating Instructions Manual Download

Page: 25 / 132

Recording – Basics

Recording a picture

180

Adjusting the LCD screen

(1)

Pull the

OPEN protrusion and open the LCD panel.

(2)

Adjust the angle.

To close the LCD panel, set it vertically and swing it into the camcorder body.

Note

When using the LCD screen except in the mirror mode, the viewfinder automatically
turns off.

When you use the LCD screen outdoors in direct sunlight

The LCD screen may be difficult to see. If this happens, we recommend that you use the
viewfinder.

When you adjust angles of the LCD panel

Make sure that the LCD panel is opened up to 90 degrees.
Do not open or turn the LCD screen forcibly.

When you adjust the brightness of the LCD panel

Select LCD BRIGHT in the menu and adjust (p. 87). This adjustment does not change
the picture brightness recorded in the disc.

Summary of Contents for MDDISCAM DCM-M1





































































































































Search results

Summary of Contents for MDDISCAM DCM-M1

Reviews:

Related manuals for MDDISCAM DCM-M1

Brands by name

Popular brands

Sony MDDISCAM DCM-M1, Operating Instructions Manual

Search results

Summary of Contents for MDDISCAM DCM-M1

Reviews:

Related manuals for MDDISCAM DCM-M1

Brands by name

Popular brands