16
Step 2 Inserting an MD DATA2 disc
Use an MD DATA2 disc. You cannot record on other types of MDs.
(1)
Lift the
b
OPEN protrusion and open the LCD panel until it stops.
(2)
Slide DISC EJECT on the bottom in the direction of the arrow and open the lid
manually.
(3)
Insert the disc.
Push the disc in the direction of the arrow deeply into the disc compartment
with the label facing up.
(4)
Close the disc lid.
To eject the disc
Follow the procedure above, and take out the disc in step 3.
Notes
•If the POWER switch is set to “CAMERA” or “INTERVIEW,” you may not be able to
eject the disc. If this happens, turn off the power first and then reconnect the power
sources. Then try again.
•Do not face the disc opening down when you insert or eject a disc to avoid dropping
the disc.
To prevent misoperation
Turn the POWER switch to “OFF” when you insert or eject a disc.
DISC EJECT
1
2
2
1
3
4
