background image

Using the voice assistant function

To start the voice assistant

Long press 

 for 1 second to talk to Google/Siri.

For these functions to work, you must use an Android or iOS device that supports the

relevant functions. Refer to instructions from the Android or iOS device for details.

Using Multipoint mode

You can use Multipoint mode to pair your headset with two compatible Android or

iOS devices at the same time. This lets you receive calls from both paired devices

without having to disconnect and reconnect.
Singlepoint mode is enabled by default, in which your headset pairs with only one

Android or iOS device. If you want to stay in Singlepoint mode but change to a new

Android or iOS device, disconnect your headset from the first device then pair it

with the new device.

Multipoint mode consumes more battery power than Singlepoint mode.

To activate Multipoint mode

1

Make sure that your headset is turned off.

2

Long press   and   until the LED indicator flashes in green three times, then

flashes twice more to indicate that Multipoint mode is turned on.

To return to Singlepoint mode

1

Make sure that your headset is turned off.

2

Long press   and   until the LED indicator flashes in green three times, then

flashes once more to indicate that Singlepoint mode is turned on.

Resetting your headset

You can perform a hardware reset or a factory reset on your headset. Perform a

factory reset if your headset behaves unexpectedly. Factory reset restores your

headset to its original settings.

To reset your headset

1

Make sure that the headset is turned off.

2

Long press   for 10 seconds until the LED indicator starts flashing quickly in

green.

To perform a factory reset on your headset

1

Turn off your headset.

2

Long press   and 

 at the same time for 1 second. The LED indicator

will flash four times rapidly in green, then three times in red.

8

This is an internet version of this publication. © Print only for private use.

Summary of Contents for MBH22













Reviews: