manualshive.com logo in svg

Sony MB-806A, Service Manual

Share
Download
Sony MB-806A Service Manual Download Page 13

1-9

MB-806A (CE)

WRU-806A

 (CE, 

AU)

L-1

Wireless Channel Lists/Übertragungskanallisten

Overview of Channel Plan/Überblick über die Kanäle

Guidance on use of multi-channel system

This product is designed to give excellent interference
free operation in multi-channel systems.  To maintain
this, Sony recommends that one of the original Sony
groups, number 01, 02, 03, 04, 13, L1, L2, M1 or M2
is selected.
These groups will offer excellent performance free
from mutual interference from other Sony wireless
microphone transmitters in the selected group when
used under the recommended operating conditions.
The remaining groups are included for compliance
with frequency regulations in various countries, and
will not always guarantee interference free operation.
Group 00 is used to scan for open channels, or to use
only for a one channel system.

Richtlinien für ein Mehrkanalsystem

Dieses Produkt wurde im Hinblick auf hervorragenden
interferenzfreien Betrieb in Mehrkanalsystemen
entwickelt. Deshalb empfehlen wir, eine der Sony-
Kanalgruppen.
Nummer 01, 02, 03, 04, 13, L1, L2, M1 oder M2
auszuwählen.
Bei diesen Gruppen erzielen Sie eine außerordentliche
Leistung ohne gegenseitige interferenzen durch andere
schnurlose Mikrofonsender von Sony in der
ausgewählten Gruppe, vorausgesetzt, die empfohlenen
Betriebsbedingungen werden eingehalten. Bei den
übrigen Gruppen gelten die Frequenzbestimmungen in
verschiedenen Ländern, und ein interferenzfreier
Betrieb kann nicht immer gewährleistet werden.
Gruppe 00 dient zum Durchsuchen offener Kanäle
bzw. eignet sich für ein Einkanalsystem.

MB-806A (CE)

Summary of Contents for MB-806A



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands