6
Operational Features
3D Projection Lens Unit
Attaching the 3D projection lens unit* to its lens mount,
the SRX-R320P can deliver crisp 3D images** to screens up
to 50 feet (15 meters)*** in width at 4.5 ft-L brightness.
It allows full 2K resolution for the left and right eyes
simultaneously, resulting in a high-brightness, high-quality
stereoscopic cinema presentation that offers more faithful
reproduction of motion in 3D.
* For detailed information on the 3D projection lens units, please contact
your nearest Sony office.
** To produce 3D images on a screen, 3D filters available from a 3D system
integrator are required. For detailed information on the 3D filters, please
contact your nearest Sony office.
*** Screens up to 50 feet (15 meters) wide are supported, when 3D images are
presented in Side Masking mode. When they are presented in Top-bottom
Masking mode, screens up to 40 feet (12 meters) wide are supported.
For detailed information on supported screen sizes, please contact your
nearest Sony office.
Anamorphic Lens
When projecting digital cinema content created in the
CinemaScope format (4096 x 1716 pixels), the SRX-R320P
cannot use all of the 4096 x 2160 pixels available for the
4K SXRD device. To improve this inefficiency, the optional
LKRL-A001 Anamorphic Lens with Lens Changer Unit * was
developed. When CinemaScope images (4096 x 1716 pixels)
are input, the SRX-R320P extends them in a longitudinal
direction via the projector’s image-processing function,
which effectively uses all the pixels of the SXRD device. The
LKRL-A001 attached** in front of the projector’s lens extends
the images in a transverse direction, so that the aspect ratio
of the images projected on a screen can be restored to its
original 2.39:1. This can increase the brightness level of the
images on the screen by approximately 20%, allowing for the
projector to provide a high brightness of 14 ft-L on screens up
to 70 feet (22 meters) wide***.
The LKRL-A001 includes a lens-changer function that can
set the anamorphic lens not to be in use manually. This
function allows for the SRX-R320P to accept digital cinema
content created in the Flat format (3996 x 2160 pixels),
without dismounting the LKRL-A001 unit from the projector.
* The LKRL-A001 supports the LKRL-Z214, LKRL-Z219, LKRL-Z117, and LKRL-Z119
optional lenses. (The LKRL-Z211 is not supported.)
** To attach the LKRL-A001 to the projector, lens support stays are required.
For detailed information, please contact your nearest Sony office.
*** The brightness level may vary depending on portglass and screen conditions.
CinemaScope Image on Screen
(aspect ratio of 2.39 :1 )
4K SXRD Device
Digital Cinema Content
in CinemaScope Format
4096 Pixels
4096 Pixels
1716 Pixels
2160 Pixels
SRX-R320P Projector
LKRL-A001
SRX-R320P with 3D projection lens unit attached
SRX-R320P with LKRL-A001 attached;
Anamorphic lens not in use
