14
Specifications of SRX-R320P
SXRD Device Main Specifications
Display device
SXRD (Silicon X-tal Reflective Display)
Size
1.55-inch (diagonal)
Resolution
4096 (H) X 2160 (V) Pixels
Reflectivity
77%
Contrast
More than 4000:1
Pixel pitch
8.5 µm
Width (between pixels)
0.35 µm
Response speed
2.5 ms (for both rise and fall)
Liquid crystal mode
Normally Black Mode
Alignment layer
Inorganic Thin Film
Backplane process
0.35 µm MOS Process
Liquid crystal cell gap
Less than 2 µm
Optical
Projection system
3-SXRD panel, prism color integrated system
Imaging device
SXRD, 1.55-inch (diagonal),
4096 (H) x 2160 (V) pixels on each chip
Lamp
4.2 kW Xenon lamp (x1) or 3.0 kW Xenon lamp (x1) or
2.0 kW Xenon lamp (x1)
Screen coverage
15-foot (4.5-meter) to 70-foot (22-meter) screen width
(approx.)
on Scope size (USHIO DXL-40SRXPRO 4.2 kW lamp and
LKRL-A001 anamorphic lens)
15-foot (4.5-meter) to 55-foot (17-meter) screen width
on Scope size (3.0 kW lamp)
15-foot (4.5-meter) to 45-foot (14-meter) screen width
on Scope size (2.0 kW lamp)
Light output
21000 lumens (center)
(Average)
(USHIO DXL-40SRXPRO 4.2 kW lamp)
General
Colorimetry
Xenon color primaries
Encoding primaries
X
Y
R
0.6800
0.3200
G
0.2650
0.6900
B
0.1500
0.0600
White reference
Xenon white reference
X
Y
White reference
0.3140
0.3510
Contrast
Over 2000:1
Input signal
Media Block input (x2): 4096 x 2160 pixels
HD-SDI/Dual-link HD-SDI*: 1920 x 1080 pixels
(SMPTE-372M/SMPTE-292M/ITU-R.BT709/BTA-S004)
DC-SDI/Dual-link DC-SDI*: 2048 x 1080 pixels
12 bit/X’Y’Z’ (with Dual-link HD/DC-SDI Input Board)
DVI-D: XGA (1024 x 768), SXGA1 (1280 x 960),
SXGA2 (1280 x 1024), SXGA+ (1400 x 1050),
UXGA (1600 x 1200), WUXGA (1920 x 1200),
HD (1920 x 1080), DC (2048 x 1080)
Power consumption
Max. 5.4 kW (USHIO DXL-40SRXPRO 4.2 kW lamp)
Max. 4.2 kW (3.0 kW lamp)
Max. 3.0 kW (2.0 kW lamp)
Power requirements
AC 200 V to 240 V, 50/60 Hz, single-phase,
27 A to 22.5 A
Operating temperature
41 °F to 95 °F (5 °C to 35 °C)
Operating humidity
35% to 85% (no condensation)
Storage temperature
12 °F to 140 °F (-20 °C to +60 °C)
Dimensions
27 5/8 x 25 1/4 x 49 1/4 inches (700 x 640 x 1250 mm)
(W x H x D)
(excluding a touch-panel display and projecting parts
of the unit such as a status light and a chimny)
Weight
429 lb (195 kg) (excluding an optional lamp and a lens)
Input/Output
Input A
DVI-D (HDCP)
Input B
Open (option slot for the LKRI-003 or LKRI-005 board)
Input C
A channel
MDR- 68-pin (x1) (for projector output A of Media Block,
SRLV connection)
B channel
MDR- 68-pin (x1) (for projector output B of Media Block,
SRLV connection)
Remote interface
D-sub 15-pin (female) (x1), RS-232C
RJ-45 (x1), 10BASE-T/100BASE-TX Ethernet
DCP ingest port (x1)
Interlock
D-sub 15-pin (female) (x1), RS-232C
For supply of power to an external ventilation fan and
control of its operation
Others
Safety regulations
[UL60950 listed], [cUL60950], [FCC Class A],
[IC Class A], [VCCI Class A], [EN60950], [CE Class A],
[C-tick], [CISPR22], [CISPR24]
Supplied accessories
Keys for removing panels (5),
Keys for lamp replacement panel (2),
Lens attachment screws (M8) (4),
Status indicator lamp (1), TPC adaptor (1 set),
One-touch bush (1), Attachment screws for status
indicator lamp and TPC adaptor (1 set),
Duct for LMT-300 (A) (1), Duct for LMT-300 (B) (1),
LVDS cables (2), CSS cable (1), Ethernet cable (1),
Operating instructions (1)
* To support the HD-SDI/Dual-link HD-SDI or DC-SDI/Dual-link DC-SDI interfaces, the LKRI-003 Dual-
link HD/DC-SDI Input Board is required. For information on using this board, please contact your
nearest Sony office.
