manualshive.com logo in svg

Sony LKRA-009, Installation Manual, Page: 113 / 170

Share
Download
Sony LKRA-009 Installation Manual Download Page 113

5-43 (E)

Digital Cinema Dual System

5-12. Folder 

Setting

Create an external folder that can be used to ingest and export DCP.

1.  Tap the “Configuration” tab.
2. Tap 

[Library]

 

→

 

[Folders]

.

 

The Folder screen is displayed.

3.  Enter each item according to “Entry to Source Definition” described later.
 

t

 

The setting value of each item varies depending on the type of external folder to be created.

4. Tap 

[New]

.

 

The created external folder is added to the list of the Source List pane.

t

To change setting, select a folder in the Source List pane and tap 

[Edit]

 after you have changed the set-

ting.
To delete an external folder, select a folder in the Source List pane and tap 

[Delete]

.

Screen example

[Library] [Folders]

Configuration tab

Source Access Information pane

[Delete]

[Edit]

[New]

Path Definition pane

Source List pane

Summary of Contents for LKRA-009











































































































































































Reviews:

No comments