![background image](http://html.mh-extra.com/html/sony/lbt-zux10d/lbt-zux10d_operating-instructions-manual_1329884076.webp)
76
GB
Notes
• There is no audio output from the
AUDIO OUT jacks when you select the
VIDEO, TV or SAT function.
• If the effector mode is activated, the
effect will be output through the AUDIO
OUT jacks.
• If the beat pattern is turned on or the drum
sound is activated, the beat sound will
also be output through the AUDIO OUT
jacks.
D
SUBWOOFER OUT jack
Use an audio cord to connect to the
audio input jack of an optional
subwoofer*.
* SA-W3000 is recommended.
In some areas, the SA-W3000 may not be
available.
Note
The effect may be limited or noise may
occur depending on the connected
subwoofer or the type of music being
played back. For details, consult your
nearest Sony dealer.
E
D-LIGHT SYNC OUT jack
(Except for Oceanian models)
Connect the D-LIGHT SYNC
controller. You need to connect the
D-LIGHT SYNC controller to a
lighting device* (not supplied). The
lighting device will react according to
the control signals transmitted by the
D-LIGHT SYNC controller upon
receiving music source from the
system. For details on the use of the
D-LIGHT SYNC controller and
lighting device, refer to the operating
instructions supplied with the
respective device.
* Refer to the operating instructions
supplied with the D-LIGHT SYNC
controller for the recommended lighting
device.
Note
The lighting effect may be different
depending on the connected lighting device
or the type of music being played back.
F
COMPONENT VIDEO OUT jacks
Use a component video cord to
connect to the component video input
jacks of a TV or projector. If your TV
accepts progressive format signals,
you must use this connection and
press PROGRESSIVE on the unit
repeatedly to select “P AUTO” or
“P VIDEO”. You can enjoy higher
quality video images.
Note
You cannot output the video signal from
the VIDEO INPUT VIDEO jack through
the COMPONENT VIDEO OUT jacks of
this unit.
G
VIDEO OUT jack
Use a video cord to connect to the
video input jack of a TV.
H
S VIDEO OUT jack
Use an S video cord to connect to the
S video input jack of a TV. You can
enjoy higher quality video images.
Note
You cannot output the video signal from
the VIDEO INPUT VIDEO jack through
the S VIDEO OUT jack of this unit.
Listening to a connected TV or
satellite tuner
Press FU/– repeatedly (or
press TV/SAT on the unit) to select “TV”
or “SAT”.
D
-LIGHT
S
YN
C
controller cord