![background image](http://html.mh-extra.com/html/sony/lbt-zux10d/lbt-zux10d_operating-instructions-manual_1329884058.webp)
58
GB
Adjusting the sound
You can reinforce the bass and create a
more powerful sound.
Press GROOVE on the unit
repeatedly.
GROOVE ON*
t
Z-GROOVE ON*
t
GROOVE OFF
t
GROOVE ON
t
…
* The volume switches to power mode and the
equalizer curve changes.
Tip
The default setting is “GROOVE ON”.
Use the buttons on the unit for the
operation.
Press one of the preset effect
buttons to select the preset effect
you want.
Press USER EQ repeatedly to
select the user equalizer you want.
Preset effect options
Adjusting the graphic equalizer and
storing the user equalizer setting
You can adjust the sound by raising or
lowering the level of specific frequency
band, then store up to three user equalizer
settings in the memory.
1
Press EQ BAND/MEMORY
repeatedly to select a frequency
band.
2
Turn OPERATION DIAL to adjust
the level.
3
Repeat steps 1 and 2 to adjust the
level of other frequency bands.
4
Press ENTER.
A user equalizer number flashes in the
display.
5
Turn OPERATION DIAL to select a
user equalizer number (1~3) you
want to store the equalizer setting.
Select “EXIT?” to cancel storing.
6
Press ENTER.
This setting is automatically stored as
the user equalizer setting you selected
in step 5.
The previous setting stored at this
memory location is erased and replaced
by the new setting.
Sound Adjustment
Reinforcing the sound
Selecting the preset effect
Effect
Category
ROCK, POP,
JAZZ, DANCE,
REGGAE, HIP
HOP, TECHNO
Standard audio sources
MP3 EQ
MP3 audio tracks
FLAT
Original audio source
(cancel the preset effect)
USER EQ 1, 2, 3 User equalizer setting
(see below)
Frequency band
Equalizer level