53
Specifications
Amplifier section
Continuous RMS power output
80 + 80 watts
(5 ohms at 1 kHz, 10%
THD)
Peak music power output 1,200 watts
Inputs
PHONO IN (phono jacks):sensitivity 3 mV,
impedance 47 kilohms
VIDEO (AUDIO) IN (phono jacks):
sensitivity 250 mV,
impedance 47 kilohms
MIX MIC (phone jack):
sensitivity 1 mV,
impedance 10 kilohms
Outputs
VIDEO (AUDIO) OUT (phono jacks):
voltage 250 mV,
impedance 1 kilohms
VIDEO (phono jack):
max. output level
1 Vp-p, unbalanced,
Sync negative,
load impedance 75 ohms
S-VIDEO (4-pin/mini-DIN jack):
Y: 1 Vp-p, unbalanced,
Sync negative
C: 0.286 Vp-p,
load impedance 75 ohms
PHONES (stereo phone jack):
accepts headphones of 8
ohms or more
SPEAKER:
accepts impedance of 5 to
16 ohms
Video CD / CD player section
System
Compact disc digital
audio and video system
Laser
Semiconductor laser
(
λ
= 780 nm)
Emission
duration: continuous
Laser output
Max. 44.6
µ
W*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Wavelength
780 – 790 nm
Frequency response
2 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
Video
Color system format
NTSC, PAL
Tuner
Severe hum or noise (“TUNED” or
“STEREO” flashes in the display.
•Adjust the antenna.
•The signal strength is too weak. Connect
an external antenna.
A stereo FM program cannot be received in
stereo.
•Press STEREO/MONO so “STEREO”
appears in the display.
If other problems not described
above occur, reset the system as
follows:
1
Unplug the power cord.
2
Plug the power cord back in.
3
Press GROOVE, ENTER/NEXT, and DISC
1 at the same time.
