Sony LBT-LV60 Operating Instructions Manual Download Page 55

Page: 55 / 60

VIDEO CD/CD Player

There is no picture.

•Check that the player is connected

correctly and securely.

•Make sure you operate the TV correctly.
•Make sure you set the SYSTEM SELECT

correctly, according to your TV (color)
system.

•Press FUNCTION repeatedly until “CD”

appears in the display.

An after image of the last picture remains
on the screen, or the picture is unclear.

•Press ACTIVE repeatedly until “ACTIVE

OFF” appears in the display.

The CD tray does not rotate.

•A CD is not placed properly.

A CD will not play.

•The CD is not lying flat in the disc tray.
•The CD is dirty.
•The CD is inserted label side down.
•Moisture condensation has built up.

Remove the CD and leave the system
turned on for about an hour until the
moisture evaporates.

Play does not start from the first track.

•The player is in Program or Shuffle Play

mode. Press PLAY MODE repeatedly
until “PROGRAM,” “ALL DISCS
SHUFFLE,” or “1 DISC SHUFFLE”
disappears from the display.

Tape Deck

The tape does not record.

•No tape is in the cassette holder.
•The tab has been removed from the

cassette (see page 53).

•The tape has reeled to the end.

The tape does not record nor play, or there
is a decrease in sound level.

•The heads are dirty. Clean them (see page

54).

•The record/playback heads are

magnetized. Demagnetize them (see page
54).

There is severe hum or noise.

• A TV or VCR is placed too close to the

stereo system. Move the stereo system
away from the TV or VCR.

“12:00AM” flashes in the display.

• A power interruption occurred. Reset the

clock and timer settings.

The timer does not function.

• Set the clock correctly.

DAILY and REC do not appear when you
press

/CLOCK SET.

• Set the timer correctly.
• Set the clock.

The remote does not function.

• There is an obstacle between the remote

and the system.

• The remote is not pointing in the

direction of the system’s sensor.

• The batteries have run down. Replace the

batteries.

There is acoustic feedback.

• Decrease the volume level.
• Move the microphone away from the

speakers or change the direction of the
microphone.

The color irregularity on a TV screen
persists.

• Turn off the TV set once, then turn it on

after 15 to 30 minutes. If the color
irregularity still persists, place the
speakers farther away from the TV set.

Speakers

There is no sound and “PUSH POWER” and
“PROTECT” appear in the display
alternately.

• Press

[/1

to turn off the system and

check the speaker connections and
placement.

Sound comes from only one channel or the
left and right volumes are unbalanced.

• Check the speaker connections and

placement.

continued

Summary of Contents for LBT-LV60





























































Search results

Summary of Contents for LBT-LV60

Reviews:

Related manuals for LBT-LV60

Brands by name

Popular brands

Sony LBT-LV60, Operating Instructions Manual

Search results

Summary of Contents for LBT-LV60

Reviews:

Related manuals for LBT-LV60

Brands by name

Popular brands