Sony KV-V28, Operating Instructions Manual

Page: 12 / 59

Getting Started
12
-EN
4
Press V or v to move the cursor (
z
) to
MANUAL PROGRAM, and press ENTER.
5
Select the program position to which you
want to preset a channel.
(1) Make sure the cursor (
z
) appears beside PR, and
press ENTER.
(2) Press V / b / v / B until the program position you
want appears on the menu, and press ENTER.
6
Select the desired channel.
(1) Press
V
or
v
to move the cursor (
z
) to VHF LOW,
and press ENTER.
(2) Press V / b / v / B until the desired channel picture
appears on the TV screen, and press ENTER.
7
Press MENU to return to the normal screen.
If the TV signal is too strong
The picture may be distorted. You can reduce the
picture distortion as described below.
1 Display the PRESET menu.
2 Press V or v to move the cursor (
z
) to MANUAL
PROGRAM, and press ENTER.
3 Press V or v to move the cursor (
z
) to ATT, and
press ENTER.
4 Press
V
/
b
/
v
/
B
to select ON, and press ENTER.
If the TV system is not properly selected
The picture color may be poor and/or the sound may
be noisy. In this case, select the appropriate TV system.
1 Press PROGR +/– or the number buttons to select
the program position.
2 Display the PRESET menu.
3 Press V or v to move the cursor (
z
) to TV SYS, and
press ENTER.
4
Press V / b / v / B until the appropriate TV system
appears, and press ENTER.
Notes
• The TV system and the ATT (attenuator) settings are
memorized for each program position.
• If you do not know your local TV system, consult your nearest
Sony dealer or authorized service center.
T V S Y S : B / G
VHF L O W
P R : 0 1
A T T : OFF
MANUA L PROGRAM
ENTER ENTER
Disabling program positions
By disabling unused or unwanted program positions,
you can skip those positions when you press PROGR
+/–.
1
Press MENU.
2
Press
V
or
v
to move the cursor (
z
) to the
PRESET menu ( ), and press ENTER.
3
Press
V
or
v
to move the cursor (
z
) to SKIP,
and press ENTER.
4
Press
V
or
v
until the unused or unwanted
program position appears on the menu,
and press ENTER.
5
Press
V
/
b
/
v
/
B
to select ON, and press ENTER.
6
To disable other program positions, repeat
steps 4 and 5.
7
Press MENU to return to the normal screen.
To cancel the skip setting
1
Display the PRESET menu.
2 Press
V
or
v
to move the cursor (
z
) to SKIP, and
press ENTER.
3 Press V or v until the program position you want to
cancel the skip setting appears, and press ENTER.
4
Press V / b / v / B to select OFF, and press ENTER.