— 27 —
KV-32XBR200/KV-36XBR200
VS CORRECTION (VSCO)
PIN AMP (PAMP)
PIN PHASE (PPHA)
V ANGLE (VANG), V BOW (VBOW), UPPER PIN (UPIN)
AND LOW PIN (LPIN) ADJUSTMENTS
1. Input a cross hatch signal.
2. Set to Service adjustment Mode.
3. Select VVANG, VBOW, UPIN, and LPIN with and
.
4. Adjust with
and
for the best picture.
5. Write the memory by Pressing
then
.
V ANGLE (VANG)
V BOW (VBOW)
UPPER PIN (UPIN)
LOW PIN (LPIN)
A BOARD
Y/B–Y/R–Y LEVEL ADJUSTMENT
1. Set: VIDEO mode = STANDARD
PICTURE = 100%
COLOR = 50%
HUE = 50%
2. Set a select Video 4 (DVD) Mode.
3. Input a 75% color bar signal.
V. SIZE ADJUSTMENT ( VSIZ)
1. Input a monoscope signal.
2. Set to Service adjustment mode.
3. Select VSIZ with
and
.
4. Adjust with
and
for the best vertical size.
5. Write into the memory by pressing
then
.
V. SIZE
V. POSITION ADJUSTMENT (VPOS)
1.Input a monoscope signal.
2.Set to Service adjustment Mode.
3.Select VPOS with
and
.
4.Adjust with
and
for the best vertical center.
5.Write into the memory by pressing
then
.
V. POSITION
H. POSITION ADJUSTMENT (HPOS)
Perform this adjustment after H. FREQUENCY ADJ. (HFRE).
1. Input a monoscope signal.
2. Set the Service adjustment Mode.
3. Select HPOS with and
.
4. Adjust with
and for the best horizontal center.
5. Write into the memory by pressing
then
.
H. POSITION
V LINEARITY (VLIN), V CORRECTION (VSCO), PIN AMP
(PAMP) AND PIN PHASE (PPHA) ADJUSTMENTS
1. Input a cross-hatch signal.
2. Set to Service adjustment Mode.
3. Select VLIN, VSCO, PAMP, and PPHA with
and
.
4. Adjust with
and for the best picture.
5. Write the memory by Pressing
then
.
V LINEARITY(VLIN)
