21
In
sta
lling
and
Conne
ctin
g the
LCD Pr
o
jec
tion T
V
KF-42/50WE620
2-108-981-31(1)
Installing and Connecting the
LCD Projection TV
Contents
The box contains your new LCD projection TV, a remote control, two AA
batteries, and a cleaning cloth. No peripheral cables are included. If you
intend to add additional equipment to your LCD projection TV, please check
the hookup instructions for your desired setup before you begin. You may
need to purchase cables and/or splitters to complete the hookup properly.
Inserting Batteries into the Remote Control
1
Remove the battery cover from the remote control.
2
Insert two size AA batteries (supplied) by matching the
e
and
E
on the
batteries to the diagram inside the battery compartment.
✍
To avoid possible battery leak damage, remove the batteries if you
anticipate the remote control will not be used for an extended period.
✍
Handle the remote control with care. Avoid dropping it, getting it wet, or
placing it in direct sunlight, near a heater, or in high humidity.
✍
Your remote control can be programmed to operate most video
equipment. (See “Programming the Remote Control” on page 77.)
1
2
01COV.book Page 21 Friday, June 11, 2004 9:05 AM
