3
Safety
❑
Operate the LCD Projection TV only on 120 V AC.
❑
The plug is designed, for safety purposes, to fit into
the wall outlet only one way. If you are unable to
insert the plug fully into the outlet, contact your
dealer.
❑
If any liquid or solid object should fall inside the
cabinet, unplug the LCD Projection TV immediately
and have it checked by qualified service personnel
before operating it further.
❑
If you will not be using the LCD Projection TV for
several days, disconnect the power by pulling the
plug itself. Never pull on the cord.
For details concerning safety precautions, see
“Important Safeguards” on page 4.
Installing
❑
To prevent internal heat buildup, do not block the
ventilation openings.
❑
Do not install the LCD Projection TV in a hot or
humid place, or in a place subject to excessive dust
or mechanical vibration.
❑
Avoid operating the LCD Projection TV at
temperature below 41°F (5°C).
❑
If the LCD Projection TV is transported directly
from a cold to a warm location, or if the room
temperature changes suddenly, the picture may be
blurred or show poor color. In this case, please wait
a few hours to let the moisture evaporate before
turning on the LCD Projection TV.
❑
To obtain the best picture, do not expose the screen
to direct illumination or direct sunlight. It is
recommended to use spot lighting directed down
from the ceiling or to cover the windows that face
the screen with opaque drapery. It is desirable to
install the LCD Projection TV in a room where the
floor and walls are not of a reflective material.
E
NERGY
S
TAR
®
is a U.S. registered mark.
TruSurround, SRS and the (
)
®
symbol are trademarks
of SRS Labs, Inc.
TruSurround technology is incorporated under license
from SRS Labs, Inc.
BBE and BBE Symbol are trademarks of BBE Sound,
Inc. and are licensed by BBE Sound, Inc. under U.S.
Patent No. 4,638,258 and 4,482,866.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
ATTENTION
Pour prévenir les chocs électriques, ne pas utiliser cette
fiche polarisée avec un prolongateur, une prise de courant
ou une autre sortie de courant, sauf si les lames peuvent
tre inserées à fond sans en laisser aucune partie à
decouvert.
As an E
NERGY
S
TAR
®
Partner, Sony
Corporation has determined that
this product meets the E
NERGY
S
TAR
®
guidelines for energy
efficiency.
