![Sony ipela SNC-RS84P User Manual Download Page 96](http://html.mh-extra.com/html/sony/ipela-snc-rs84p/ipela-snc-rs84p_user-manual_418091096.webp)
A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Sensor input/Camera tampering detection/Motion detection/Audio detection — Event detection menu
96
Preview screen
This screen is for monitoring images and configuring
active/inactive windows.
Note
The frames shown on the monitor screen are not
displayed on the image files sent or recorded with
motion detection.
Target of setting
Select the camera position subject to detection settings
and VMF settings from
Current position
or
Preset
.
If you select Items to configure, the
Current Position
and
Preset
will be displayed. Selecting
Preset
will
display
Restore preset
.
Current position:
Select this option to set the current
camera position as the subject of configuration.
Preset:
Select this option to configure each preset.
Select a preset from the list and move the camera to
the preset position. The setting is enabled when the
camera has moved to the set preset position.
Current position
Preset
Notes
• Camera control can be used when the mode is
“Current position” mode.
• Detection settings and VMF settings should be saved
independently when the and
Current position
and
Preset
is selected.
Detection settings
Detection area
Specify the effective scope of motion detection.
Configuring the detection area
The following procedure is used to configure the motion
detection area:
1
Use the following buttons to specify the active
area(s) and inactive area(s).
Adding an active area
Clicking
Adding an active area
will add an active
area window in the center of the screen.
When you place the cursor on the area, the cursor
changes to a crossed arrow, which you can drag to
move the area.
When you place the cursor on the vertex of the area,
the cursor changes to
n
, which you can drag to
move the vertex.
Active window Inactive window