Sony Ipela SNC-CS50N, Service Manual

Page: 24 / 76

2-8 (E)
SNC-CS50N/CS50P
G
Yes No
Yes No
2-2-7. Read of Detection Data at 3200 K
1. Press the
[Tab]
key and display the message box
below.
n
This message box is displayed when you press the
[Tab]
key with adjustment item BY Hue activated.
When this message box is incorrectly displayed, click
the
[OK]
button and then click the
[No]
button in the
next message box (refer to step 3). After that, press
the
[Tab]
key and activate the required adjustment
item.
2. Set steps (1) and (2) below with the message box
displayed.
(1) Shoot a 100% white pattern using this unit.
(2) Set the lens iris so that waveform level G satisfies
the specifications.
Object:
100% white pattern
Measuring equipment: Waveform monitor
Specifications:
G = 65
±
3 IRE (NTSC)
G = 460
±
21 mV (PAL)
Waveform monitor
3. Click the
[OK]
button of the message box and read
detection data.
The numeric values of each edit box on the “WB Data
Take-in” panel change when read operation is
completed. The message box below is then displayed.
4. Click the
[Yes]
button and save the read detection
data in EEPROM.
5. Click the
[OK]
button when the message box below is
displayed.
6. Perform “2-2-8. Termination processing”.
2-2-8. Termination Processing
1. The message box below is displayed when step 5 in
Section 2-2-7 is performed.
2. Click the
[Yes]
button.
The message box below is displayed.
n
The current display returns to “3-2-6. Color
reproduction adjustment” when you click the
[No]
button.