94
Registering a Remote Party – Phone Book
One-Touch Dial Specified
Select whether to display the one-touch dial buttons in the Home menu.
Assign the F1, F2, F3 or F4 function button on the Remote Commander to
each one-touch dial button.
Line I/F
Select the line interface you are using to connect to a remote party. Select
from IP and SIP. Selecting any interface switches the setting items in the
List Edit menu.
When a checkmark is put to “SIP” under “Line Interface” of the Line Interface setup
menu, you can select “SIP” from “Line I/F”.
Communication Bit Rate
Select the communication bit rate when you select “IP” or “SIP” with
“Line I/F”.
Auto Dial
Set this item only for the Private Phone Book (page 98). Setting “Auto
Dial” to “On” allows you to automatically dial one of the lists in the Private
Phone Book simply by inserting the USB storage device on which the
Private Phone Book is registered.
4
Use the
V
,
v
,
B
or
b
on the Remote Commander to select “Save”, then
press the ENTER button.
The settings are registered in the Phone Book.
When a connection with a remote party not registered in the Phone Book is terminated,
you can register this remote party to the Phone Book. In this case, the IP address or line
number is shown in “Index” as the name of the remote party. Modify it if necessary.
To set up more detailed options
When “More Options Enable” is set to “On” in the Dial setup menu, the More
Options button is shown at the lower part of the List Edit menu.
Select the More Options button with the
V
,
v
,
B
or
b
button on the Remote
Commander and press the ENTER button to open a menu for more detailed
dial settings. You can change the settings of the desired items.
• The “More Options Enable” setting in the Dial setup menu cannot be configured from
the unit and can only be configured with the Web Control Function.
• The contents set with the More Options button have priority over those set in the Dial
setup menu.
Note
Note
Notes
Summary of Contents for Ipela PCS-XC1
Page 190: ...Sony Corporation ...
