50
Registering Local Information
Network Mask
Enter the network mask.
Gateway Address
Enter the default gateway address.
Primary DNS
Enter a primary DNS address.
Secondary DNS
Enter a secondary DNS address.
LAN Mode (Web Control Function
only)
Allows you to select the interface type and
the communication mode of the LAN
connection.
Auto:
The interface type and the
communication mode are detected
automatically.
1000Mbps:
Connects via 1000BASE-T.
100Mbps Full Duplex:
Connects via
100BASE-TX in full duplex mode.
100Mbps Half Duplex:
Connects via
100BASE-TX in half duplex mode.
10Mbps Full Duplex:
Connects via
10BASE-T in full duplex mode.
10Mbps Half Duplex:
Connects via
10BASE-T in half duplex mode.
PPPoE
PPPoE
Allows you to select whether to use PPPoE
for LAN connection.
Off:
Does not use PPPoE.
On:
Uses PPPoE for LAN connection using
the
(LAN)
connector.
The PPPoE registration status appears at the
bottom of the screen for each page.
User Alias
Enter a user name when you use PPPoE for
LAN connection.
Password
Enter a password when you use PPPoE for
LAN connection.
Fixed IP for PPPoE
Select whether to make a PPPoE connection
using a fixed IP address.
Off:
Does not use a fixed IP address for a
PPPoE connection.
On:
Uses a fixed IP address for a PPPoE
connection.
Fixed IP Address for PPPoE
Enter an IP address when “Fixed IP for
PPPoE” is set to “On”.
DNS
Allows you to select whether to obtain DNS
server addresses automatically or to specify
them manually when connecting to a LAN
using PPPoE.
Obtain automatically:
Assigns DNS server
addresses automatically.
Specify:
Allows you to specify DNS server
addresses.
Primary DNS
Enter a primary DNS address.
Secondary DNS
Enter a secondary DNS address.
NAT Setup
NAT Mode
Allows you to select whether you connect
the unit to a local network using Network
Address Translation (NAT), which allows
one IP address to be shared by several
computers on the same LAN.
Auto:
Enables or disables the NAT mode by
automatically detecting the use of NAT.
This option is effective only when you
use the UPnP router.
On:
Enables NAT mode.
Off:
Disables NAT mode.
WAN IP Address
Enter the IP address for the Wide Area
Network (WAN).
Note
LAN
LAN
Summary of Contents for Ipela PCS-XC1
Page 190: ...Sony Corporation ...
