Sony Ipela PCS-XC1, Operating Instructions Manual

Page: 20 / 190

20
Preparing the System
• Make sure to insert the batteries with the polarities in the correct direction.
• Do not mix old and new batteries, or different types of batteries.
• Do not attempt to charge the batteries.
• If you do not intend to use the Remote Commander for a long period of time,
remove the batteries.
• If battery leakage occurs, clean the battery compartment and replace all the
batteries with new ones.
Installing batteries
Two size AA (R6) batteries are required to operate the supplied Remote
Commander.
To avoid risk of explosion, use size AA (R6) manganese or alkaline batteries.
The supplied Remote Commander controls the unit using the radio frequency
of 2.4 GHz. The Remote Commander and the unit are paired to prevent
interference from other Remote Commanders and systems.
Pairing between the Remote Commander and the unit is programmed at the
factory.
When performing a pairing procedure, be sure to turn off other HD Visual
Communication Systems located nearby that are not targets for pairing. If multiple
devices are turned on, the Remote Commander might pair with a device other than the
target one.
You can use the following procedure if you need to perform pairing with the
unit again.
To pair the Remote Commander with the unit
1
Press the 1 (power) switch on the unit to turn it on.
The POWER indicator lights when the unit turns on.
Pairing the Remote Commander with the Unit
Note
/
F1 F2 F3 F4
T
W
1 2 3
4 5 6
7 8 9
0
/
GHI JKL MNO
PQRS TUV WXYZ
ABC DEF
PRESENTATION
LAYOUT
RETURN
CONNECT
ON/OFF
MIC
BACK
SPACE DISCONNECT
TONE DOT
TOOLS
VOLUME ZOOM
VIDEO INPUT CAMERA
ENTER
1
LED indicator
3
2