Sony ILME-FX30, Help Manual

Page: 256 / 487

Help Guide
Interchangeable Lens Digital Camera
ILME-FX30
Anti-flicker Set.
To reduce the impact of flickering from artificial light sources (such as fluorescent or LED light), you can set the shutter
speed more finely than usual.
This function reduces differences in exposure and color tone between the upper and lower parts of an image shot under
artificial light sources.
Menu item details
Var. Shutter:
Reduces the appearance of band-like light and dark shading on the image by finely adjusting the shutter speed
according to the flickering frequency. ([On]/[Off])
[
Var. Shutter] can only be selected when the camera is in an exposure mode that allows you to manually adjust the
shutter speed (both still images and movies).
Var. Shutter Set.:
Sets the shutter speed when [ Var. Shutter] is set to [On].
Select a shutter speed that reduces the impact of flickering while checking the monitor. The faster you set the shutter
speed, the more likely there is to be a difference between the monitor display before shooting and the recorded image.
Make sure that the impact of flickering is reduced in the recorded image.
Hint
When [ Var. Shutter Select] is assigned to a custom key, you can switch the [ Var. Shutter] function on and off by pressing
the key.
When [ Var. Shutter] is set to [On], the shutter-speed denominator is displayed in the decimal format (high-resolution shutter
speed).
For example, if the normal shutter speed is set to 1/250 second, the value will be displayed as 250.6. (The numbers may differ
from the actual ones.)
On the [ Var. Shutter Set.] screen, you can finely adjust the high-resolution shutter speed using the rear dial or control wheel
as in the following example.
250.6 → 253.3 → 256.0 → 258.8*
You can change the high-resolution shutter speed to an integral multiple value using the front dial, as in the following example.
125.3 (2 times) ← 250.6 → 501.3 (1/2 times)
*
When [ Var. Shutter] is set to [On], the high-resolution shutter speed can be finely adjusted on the shooting standby screen. If
you want to change the high-resolution shutter speed to an integral multiple value even on the shooting standby screen, assign
[Shutter Speed(step)] to a custom key or the “My Dial” setting.
When you change the [ Var. Shutter] setting from [On] to [Off], the high-resolution shutter speed switches to the closest value
among normal shutter speeds.
Note
When [ Var. Shutter] is set to [On], the release time lag may be longer.
Even when [ Var. Shutter] is set to [On], depending on the frequency of the light source, you may be unable to set the
appropriate shutter speed and eliminate the impact of flickering. In that case, try the following.
Setting a slower shutter speed
MENU → (Shooting) → [Shutter/Silent] → [Anti-flicker Set.] → desired setting item.
1
The numbers may differ from the actual ones. *
256