communication status is poor, move closer to the access point to be connected.
Third parties may know where you shot the image if you upload the image when [
Loc. Info. Link
Set.]
→
[Location Info. Link] is set to [On]. To prevent third parties from obtaining your location
information, set [
Loc. Info. Link Set.]
→
[Location Info. Link] to [Off].
This product does not support Eye-Fi “Endless Memory Mode.” Before using an Eye-Fi card, be sure
that “Endless Memory Mode” is turned off.
When you use a new Eye-Fi card for the first time, copy the installation file on the Eye-Fi card to your
computer before formatting the Eye-Fi card.
Update the firmware of an Eye-Fi card to the latest version before using the Eye-Fi card. For details,
refer to the manual supplied with the Eye-Fi card.
For details on files you can upload, refer to the manual supplied with the Eye-Fi card.
[208] Customizing the camera
Camera settings
Audio signals
Selects whether the product produces a sound or not.
Menu item details
On:
Sounds are produced for example when the focus is achieved by pressing the shutter button
halfway down.
Off:
Sounds are not produced.
Note
If [Focus Mode] is set to [Continuous AF], the camera will not beep when it focuses on a subject.
[209] Customizing the camera
Camera settings
Pwr Save Start Time
Sets time intervals to automatically switch to power save mode when you are not performing
MENU
→
(Camera Settings2)
→
[Audio signals]
→
desired setting.
1
Summary of Contents for ILCA-99M2
Page 413: ......
