The shooting mode is set to [Sweep Panorama].
[Picture Effect] is set to one of the following: [Rich-tone Mono.]
[DRO/Auto HDR] is set to [Auto HDR].
[63] Shooting
Selecting a drive mode (Continuous shooting/Self-timer)
Self-timer
Shoots an image using the self-timer after a designated number of seconds have elapsed since
the shutter button was pressed. Use the 5-second/10-second self-timer when you are going to
be in the picture, and use the 2-second self-timer to reduce camera-shake caused by pressing
the shutter button.
Menu item details
Sets the number of seconds in which the picture is taken after the shutter button is pressed.
Self-timer: 10 Sec
Self-timer: 5 Sec
Self-timer: 2 Sec
Hint
Press the shutter button again or press
/
(Drive Mode) button to stop the count of the self-
timer.
Press the
/
(Drive Mode) button and select
(Single Shooting) to cancel the self-timer.
Set [Audio signals] to [Off] to mute the beep sound during self-timer counting.
/
(Drive Mode) button
→
[Self-timer].
You can also set the drive mode by selecting MENU
→
(Camera Settings1)
→
[Drive Mode].
1
Select the desired mode by pressing the multi-selector right/left.
2
Adjust the focus and shoot the image.
The self-timer lamp flashes, a beep sounds, and a picture is taken after the designated
number of seconds have elapsed.
3
Summary of Contents for ILCA-99M2
Page 413: ......
