To adjust the shutter speed and aperture value to the desired settings, set the shooting mode to
(Movie/S&Q Motion).
The following settings for still image shooting are applied to the movie shooting:
ISO
White Balance
Creative Style
Exposure Comp.
Metering Mode
Face Detection
D-Range Opt.
Lens Comp.
Picture Effect
You can change the settings for ISO sensitivity, exposure compensation, and focus area while
shooting movies.
While shooting movies, the recorded image can be output without the shooting information display by
setting [HDMI Info. Display] to [Off].
Note
The sound of the lens and the product in operation may be recorded during movie recording.
You can turn the sound off by selecting MENU
→
(Camera Settings2)
→
[Audio Recording]
→
[Off].
When shooting, the sound of the shoulder strap hooks (triangular hook) could be recorded,
depending on the situation used.
The temperature of the camera tends to rise when shooting movies continuously, and you may feel
that the camera is hot. This is not a malfunction. Also, [Internal temp. high. Allow it to cool.] may
appear. In such cases, turn the camera off and wait until the camera is ready to shoot again.
When the
icon appears, the temperature of the camera is too high. Turn the camera off and wait
until the camera is ready to shoot again.
For the continuous shooting time of a movie recording, refer to “Recordable movie times.” When
movie recording is finished, you can restart recording by pressing the MOVIE button again.
Recording may stop to protect the product, depending on the temperature of the product or the
battery.
Auto focus function can be used only when the shooting mode is set to [Program Auto]. In that case,
the aperture value is locked to F3.5 (when the minimum F-value of the lens is F3.5 or larger, the
aperture value is set to the minimum F-value).
When the mode dial is set to
(Movie/S&Q Motion) or when shooting movies, you cannot select
[Lock-on AF] for [Focus Area].
When the shooting mode is
(Movie/S&Q Motion), [AF System] is set to [Ddc Phase AF Only].
The number of focus points is limited to 61.
In [Program Auto] mode when shooting movies, the aperture value and the shutter speed will be set
automatically and cannot be changed. For that reason, the shutter speed may become fast in a
bright environment, and the motion of the subject may not record smoothly. By changing the
exposure mode and adjusting the aperture value and the shutter speed, the motion of the subject
can be recorded smoothly.
In movie shooting mode, the following settings cannot be set in [Picture Effect]. When a movie
Summary of Contents for ILCA-99M2
Page 413: ......
