Sony IC RECORDER ICD-SX750 User Manual Download

Page: 86 / 136

ICD-SX750 4-157-612-13(1)

Menu items

Settings (*: Initial setting)

See page

PLAY MODE

Sets the playback mode.

A message is played back and the IC recorder stops after

playback.

Messages in one folder are played back continuously and

the IC recorder stops after playback.

ALL:

All the messages are played back continuously and the IC

recorder stops after playback.

One message is played back repeatedly.

Messages in one folder are played back repeatedly.

ALL:

All the messages are played back repeatedly.

ADD/OVERWRITE

You can add a recording to a previously recorded message

or an overwrite recording during playback.

ADD:

You can add a recording.

OVERWRITE:

You can overwrite a recording.

OFF*:

You cannot add or overwrite a recording.

44, 46

ERASE ALL

All messages in the selected folder will be erased.

Press /MENU to return to the folder window before erasing

the messages and select a folder from which all messages are

to be erased, then go to the menu window and select “YES.”

NO*: The erase function is cancelled.

Summary of Contents for IC RECORDER ICD-SX750









































































































































Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands

Sony IC RECORDER ICD-SX750, User Manual

Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands