Sony HXR-NX200 Operating Manual Download Page 79

Page: 79 / 122

Us
in

th
e

You can set the camera shake reduction
when shooting.

STANDARD (

)

Uses Steady Shot when shooting under
relatively stable conditions.

ACTIVE (

)

Uses Steady Shot with more powerful
effect.

OFF (

)

Does not use SteadyShot.
This setting is recommended when you use
a tripod.

Note

• When [ACTIVE] is selected, the angle of view

shifts 1.08 times toward the telephoto side.

Tip

• You can assign this function to an ASSIGN

button (p. 58).

Set when using a conversion lens (sold
separately) that is supported by the
camcorder.
This optimizes the steady shot correction
and focusing for the conversion lens.

OFF

Not using a conversion lens.

WIDE CONVERSION

Using a wide conversion lens.

See page 55.

See page 45.

You can automatically correct for
backlighting.

OFF

Does not correct for backlighting.

Automatically corrects for backlighting.

See page 34.

This sets the lighting method for a video
light (sold separately) attached to the multi-
interface shoe.

POWER LINK

Video light turns on/off when the
camcorder power is turned on/off.

REC LINK

Video light turns on/off when the
camcorder starts/stops recording.

REC LINK+STBY

Video light turns on or switches to standby
when the camcorder starts/stops recording.

AUTO

Light turns on automatically.

You can record clear images with
NIGHTSHOT (p. 46), which uses an
infrared light when shooting.

Emits infrared light.

OFF

Does not emit infrared light.

STEADYSHOT

CONVERSION LENS

S&Q MOTION

AUTO MODE SET

SCENE SELECTION SET

AUTO BACK LIGHT

FACE DETECTION

VIDEO LIGHT

NIGHTSHOT LIGHT

Continued

Summary of Contents for HXR-NX200



























































































































Search results

Summary of Contents for HXR-NX200

Reviews:

Related manuals for HXR-NX200

Brands by name

Popular brands

Sony HXR-NX200, Operating Manual

Search results

Summary of Contents for HXR-NX200

Reviews:

Related manuals for HXR-NX200

Brands by name

Popular brands