Sony HVR-1500A Operating Instructions Manual Download

Page: 99 / 111

Troubleshooting

Ch
apt

er 8

int
ena

nc
e and

roub

les
h

ting

Alarm message on monitor
screen (Cause)

Direction

Alarm message in time counter display

THE SELECTED AUDIO
RECORDING MODE IS
DIFFERENT FROM THE AUDIO
FORMAT OF THE TAPE.

MATCH AUDIO RECORDING MODE
SELECTION WITH THE ONE ON THE
TAPE.

A mode err!

NO CASSETTE ADAPT CAN BE
USED.

EVEN IF THE CASSETTE IS OF MINI
SIZE, USE IT WITHOUT CASSETTE
ADAPTOR.

Adaptor!

NO CASSETTE INSERTED.

–

No Cass!

THE REC/SAVE SWITCH ON
THE CASSETTE IS SET TO THE
SAVE POSITION.

REC INHI.!

AUDIO RECORDING MODE
CANNOT BE CHANGED
DURING RECORDING.

REC mode!

AUDIO MIXING MODE CANNOT
BE CHANGED DURING
RECORDING.

INPUT SELECTION CANNOT BE
CHANGED DURING
RECORDING.

TAPE ENDED DURING
CLEANING.

USE NEW CLEANING CASSETTE.

Tape End!

A CLEANING CASSETTE HAS
BEEN INSERTED.

THE CASSETTE WILL BE
AUTOMATICALLY EJECTED AFTER
CLEANING IS COMPLETED.

Cleaning Tp

MOISTURE CONDENSATION
HAS BEEN DETECTED.

KEEP THE POWER ON AND WAIT
UNTIL THIS INDICATION GOES OFF.

HUMID!

TAPE NOT RECORDABLE.

USE DVCAM/DV ME TAPE.

REC INHI.!

AUDIO NOT EDITABLE ON THIS
TAPE.

USE A TAPE RECORDED IN 2CH/
48kHz OR 4CH/32kHz.

2CH/32kHz!

USE 2CH/48kHz OR 4CH/32kHz
TAPE.

Fs 44.1kHz!

USE A TAPE RECORDED IN LOCKED
AUDIO MODE.

UNLOCK mode

THIS TAPE IS NOT EDITABLE.

USE A TAPE RECORDED IN DVCAM
FORMAT.

Not DVCAM!

USE A TAPE RECORDED IN 625/60
FORMAT.

525/60 Tape

USE A TAPE RECORDED IN 525/60
FORMAT.

625/50 Tape

THIS TAPE CANNOT BE
PLAYED BACK.

USE A TAPE RECORDED IN 625/50
FORMAT.

525/60 Tape

USE A TAPE RECORDED IN 525/60
FORMAT.

625/50 Tape

THIS TAPE FORMAT IS NOT
SUPPORTED.

USE A TAPE RECORDED IN THE
FORMAT SUPPORTED BY THIS VCR.

ILL. FORMAT!

TAPE NOT USABLE.

USE DVCAM/DV ME TAPE.

ILL. Tape!

Summary of Contents for HVR-1500A
















































































































Search results

Summary of Contents for HVR-1500A

Reviews:

Related manuals for HVR-1500A

Brands by name

Popular brands

Sony HVR-1500A, Operating Instructions Manual

Search results

Summary of Contents for HVR-1500A

Reviews:

Related manuals for HVR-1500A

Brands by name

Popular brands