HT-XT100
18
HOTEL MODE
The hotel mode can be performed.
(This mode is used by hotel equipment administrator)
Note:
At the same time it is cannot perform the demo mode (page 17).
Procedure:
1. Press the [
@
/
1
] button to turn the power on.
2. Press two buttons of the [
@
/
1
] and [VOL
−
] simultaneously for
5 seconds.
3. The message “HOTEL” is displayed on the screen display
panel.
Screen display
Blinking
4. Press the [ENTER] button on the remote commander, the mes-
sage “OFF” (current setting) is displayed on the screen display
panel.
5. Select the “ON” to press the [
V
]/[
v
] buttons on the remote
commander, and press the [ENTER] button on the remote
commander.
6. Changed to hotel mode “ON”, and return to the normal display.
7. Press two buttons of the [
@
/
1
] and [VOL
−
] simultaneously for
5 seconds.
8. The message “HOTEL” is displayed on the screen display
panel.
9. Select the “MAXVL” to press the [
V
]/[
v
] buttons on the re-
mote commander, and press the [ENTER] button on the re-
mote commander.
Screen display
Blinking
Note:
If hotel mode is “OFF”, “MAXVL” cannot be selected (not dis-
played).
10. The message “VOL50” (current setting) is displayed on the
screen display panel.
Screen display
Blinking
11. Select the maximum volume setting (0 to 50) to press the [
V
]/
[
v
] buttons on the remote commander, and press the [ENTER]
button on the remote commander.
12. Maximum volume setting of the hotel mode is complete, return
to the normal display.
Initial setting for hotel mode:
When the power is turned on, always volume is “0”.
Maximum volume will be changed to the settings value (default
50).
Releasing method:
Perform the “FACTORY RESET” (page 17). Or the step 5 of this
mode settings to select the “OFF” and press the [ENTER] button
on the remote commander.
Note:
The hotel mode does not release by unplug the AC cord.
