HT-XT100
10
2-7. MAIN BOARD
2-8. LOUDSPEAKER (10 cm) (SP1)
1
connector
(XS1)
5
MAIN board
4
four screws
(3
u
7 S)
– AMP block front bottom view –
:LUHVHWWLQJ
hook
MAIN board
POWER board
2
screw
(3
u
10 B)
3
screw
(3
u
6 B)
1
four screws
(4
u
12 B)
– Front bottom view –
2
Lift up the loudspeaker (10 cm) (SP1)
in the direction of the arrow.
3
terminal (wide side)
[red]
3
terminal (narrow side)
[black]
speaker cord
speaker terminal
OK
How to install the speaker terminal
Insert the speaker terminal straight into the interior.
There is a possibility that using this unit without the speaker terminal
correctly installed will damage it.
Insert straight into the interior.
speaker cord
speaker terminal
NG
Insert only part way.
– Bottom view –
loudspeaker (10 cm)
(SP1)
terminals position
front side
Note 2:
When installing the loudspeaker (10 cm) (SP1), make
the position of terminals as shown in the figure below.
4
loudspeaker (10 cm) (SP1)
Note
1:
When installing the loudspeaker
(10 cm) (SP1), be careful not to
pinch the speaker cable between
the loudspeaker (10 cm) and the
cabinet
assy.
How to install the loudspeaker (10 cm) (SP1)
