HT-S200F/SF200/SF201
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2018.01
New
1.1
2018.02
Addition of CH, SP, TW, TH and LA models (HT-S200F)
Deletion of Part for Ref. No. CN2008 on the MAIN board
(SMR-17045)
1.2
2021.02
Change of Part for Ref. No. Q2011, Q3203 and Q3209 on the MAIN board
Change of Part No. for Instruction manual (HT-S200F: SP, TW/SF200/SF201)
Change of Part for AC adaptor (Ref. No. 503)
Change of Part No. for Power supply cord set (Ref. No. 506) (HT-S200F: CH, SP, LA/SF200/SF201)
(SMR-20036)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a di
ff
erent page, use
the PDF
fi
le search function to
fi
nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note:
If you still see the original page, press the [Enter] key again.
SYS SET
2021/02/16 22:34:59 (GMT+09:00)
