![background image](http://html.mh-extra.com/html/sony/ht-s200f/ht-s200f_service-manual_418749026.webp)
HT-S200F/SF200/SF201
26
Volume setting:
1. While entered state to the AMP test mode, press the [
%
] button
on the remote control.
2. The volume setting mode is entered, and the LEDs light up as
shown in the following
fi
gure.
light up
Volume setting: Normal
3. Each time the [
%
] button on the remote control is pressed, vol-
ume setting is changed.
light up
Volume setting: Normal
light up light up
Volume setting: MSM
Note 1:
If the setting is “MSM”, press the [
2
+]/[
2
–] buttons on the
remote control, “Volume minimum”
“Volume 25”
“Volume
maximum” to the volume setting is changed.
Note 2:
The setting “Normal” is normal volume mode.
4. Perform other AMP test items or release the AMP test mode.
VACS setting:
1. While entered state to the AMP test mode, press the [AUTO
SOUND] button on the remote control.
2. The VACS setting mode is entered, and the LEDs light up as
shown in the following
fi
gure.
light up
VACS setting: ON
3. Each time the [AUTO SOUND] button on the remote control
is pressed, VACS on/o
ff
setting is changed.
light up
The all LEDs light off.
VACS setting: ON
VACS setting: OFF
4. Perform other AMP test items or release the AMP test mode.
DRC setting:
1. While entered state to the AMP test mode, press the [
>
] but-
ton on the remote control.
2. The DRC setting mode is entered, and the LEDs light up as
shown in the following
fi
gure.
light up
DRC setting: ON
3. Each time the [
>
] button on the remote control is pressed,
DRC on/o
ff
setting is changed.
light up
The all LEDs light off.
DRC setting: ON
DRC setting: OFF
4. Perform other AMP test items or release the AMP test mode.
SYS SET
2021/02/16 22:34:59 (GMT+09:00)