HT-S200F/SF200/SF201
4
MODEL IDENTIFICATION
Distinguish by Part No. and Destination code of the model number
label on the bottom side of the main unit.
– Bottom view –
MODEL NUMBER LABEL
Destination code
Part No.
Model name
(color)
Destination
Part No.
Destina-
tion code
HT-S200F
(Charcoal Black)
US, CND
4-725-506-0
[]
(UC2)
CH
4-732-651-0
[]
(CN4)
SP
4-732-650-0
[]
(SP1)
TW
4-738-132-0
[]
(TW2)
TH
4-732-652-0
[]
(TH1)
LA
4-732-654-0
[]
(LA9)
HT-S200F
(Crème White)
CH
4-732-657-0
[]
(CN4)
TW
4-732-653-0
[]
(TW2)
HT-SF200
(Charcoal Black)
AEP
4-725-507-0
[]
(CEL)
UK
4-732-649-0
[]
(CEK)
HT-SF201
(Crème White)
AEP
4-725-510-0
[]
(CEL)
DESTINATION ABBREVIATIONS
The following abbreviations for model destinations are used in this
service manual.
• Abbreviations
AEP :
European area (Except for UK, Ireland), East European
area, CIS area (Moldova) and Middle East area (Israel,
Jordan) models
CH
: Chinese model
CND : Canadian and Latin American area (Puerto Rico) models
LA
: Latin American area (Except for Puerto Rico) model
SP :
South East Asian area (Except for Thai), East Asian area
(Hong Kong, Mongolia) and Oceania area models
TH :
Thai
model
TW :
Taiwan
model
UK
: UK and Ireland models
NOTE OF REPLACING THE TOUCH BOARD FOR RE-
PAIRING
When the TOUCH board is defective, replace the complete mount-
ed board. The mounted parts cannot be replaced with single for
repairing.
The schematic diagram and printed wiring board of the TOUCH
board is not described in this service manual.
NOTE OF REPLACING THE ELECTRICAL PARTS ON
EACH BOARD FOR REPAIRING
Among mounted electrical parts on each board, only parts that are
described in the electrical parts list can be replaced for repairing.
The parts that are not described in the electrical parts list cannot be
replaced with single for repairing.
SPREADING OF COMPOUND
When the IC1001, IC1002 on the MAIN board or the MAIN board
is replaced, spread the compound to the touching portion between
the IC1001, IC1002 and the heat sink.
– MAIN Board (Side A) –
IC1001 IC1002
compound
MALFUNCTION PREVENTION OF THE BUTTON (TOUCH
PANEL SWITCH)
When the button portion on the top side of the main unit are
touched with something such as the
fl
oor surface, there is a pos-
sibility of occurring the malfunction.
When performing the operation check in the state that the top side
on this unit is under, set the stand etc. to the position that avoids the
button portion as shown in the
fi
gure below, perform in the state
that the button portion does not touch anything.
bottom side
stand
stand
button portion
COLOR VARIATION
HT-S200F
(B) Charcoal Black : US, CND, CH, SP, TW, TH, LA
(W) Crème White : CH, TW
HT-SF200
(B) Charcoal Black : AEP, UK
HT-SF201
(W) Crème White : AEP
Ver. 1.1
SYS SET
2021/02/16 22:34:59 (GMT+09:00)
