54
GB
[External Input
Settings]
x
[Input Skip Setting]
The skip setting is a convenient feature that
allows you to skip unused inputs when
selecting a function by pressing
FUNCTION.
[Do not skip]: The system does not skip the
selected function.
[Skip]: The system skips the selected
function.
x
[Bluetooth AUDIO - AAC]
You can enable and disable AAC audio.
[On]: AAC audio if the BLUETOOTH
device supports AAC.
[Off]: SBC audio.
You can enjoy high quality sound if the AAC is
enabled. In case AAC sound is not supported on
your device, select [Off].
x
[Bluetooth Power Setting]
[On]: The Bluetooth power is turned on.
A paired BLUETOOTH device can
connect to the main unit when a function
other than “BT” function is selected.
[Off]: The BLUETOOTH power is only
turned on when “BT” function is selected.
In some applications, you may not be able to
make the connection directly from the
BLUETOOTH device even though you have set
[Bluetooth Power Setting] to [On]. In this case,
press BLUETOOTH.
[Network Settings]
x
[Wireless Network Settings]
Connect the system to the network
beforehand using the built-in wireless LAN
of the system for wireless network
connection. For details, see “Step 3:
Preparing for Network Connection”
(page 31).
For further details, visit the following website and
check the FAQ:
http://www.sony.jp/home-theater/
x
[Network Connection Status]
Displays the current network connection
status.
x
[Auto Renderer Access
Permission]
[On]: Allows automatic access from a
newly detected controller.
[Off]: Off.
x
[Renderer Access Control]
Sets whether or not to accept commands
from controllers.
x
[Remote Start]
[On]: Allows turning on the system by a
device linked via network when the system
is in standby mode.
[Off]: The system cannot be turned on by a
device linked via network.
Note
Note
Tip
