Sony HKSR-9003, Operation Manual

Page: 20 / 177

Locations and Functions of Parts 20
Chapt
er
1
Ov
er
v
ie
w
f
EJECT button
Pressing this button opens the lid of the cassette
insertion slot, allowing you to take out the
inserted cassette.
The control panel is used mainly for control of the
VTR module.
a
VTR menu selection buttons
Select one of the VTR menus to be shown on the
display.
HOME button: Displays the HOME screen. The
HOME screen displays audio levels,
operating status, warnings, time data, and
other information.
TC button: Displays the TC (timecode) Setup
menu (see page 130) . This menu allows you
to switch between LTC and VITC, to switch
between DF and NDF, and to display
timecode on an external monitor.
VIDEO button: Not used in this version.
AUDIO button: Displays the AUDIO Setup
menu (see page 133) . This menu allows you
to make settings related to audio.
SYSTEM button: Displays the SYSTEM Setup
menu (see page 135) . This menu allows you
to make settings related to the entire system,
such as recording format, power, and test
signal output.
For details on VTR menus, see “VTR Menu List”
(page 130).
b
Display
Displays VTR menus, audio levels, warnings,
operating status, time data, remaining tape time,
and remaining battery power.
For details, see “Display” (page 24).
c
KEY INHI (inhibit) switch
When the KEY INHI item (see page 137) in the
SYSTEM Setup menu is set to ALL, setting this
switch to ON disables operation buttons, to
prevent misoperations due to accidental button
operations.
ON: All operation buttons are disabled.
OFF: During recording, only the STOP button
and PAUSE button are enabled. All buttons
are enabled when the system is not recording.
When the KEY INHI item in the SYSTEM Setup
menu is set to MAP, the operation buttons follow
the settings of the LOCAL KEYMAP item.
d
LIGHT switch
The backlight comes on when this is set to ON.
e
ADJUST knob
Use to adjust audio levels, etc.
f
SELECT/ENTER dial
When a menu is displayed, you can turn this dial
to move the cursor, and press it to select and
confirm settings.
g
BACK button
When a menu is displayed, you can press this
button to back up one level in the menu structure.
h
Control panel connection cable
Connect to the CTRL (VTR) connector.
i
EJECT button and indicator
Pressing the button opens the cover of the cassette
insertion slot so that you can remove a cassette.
The indicator lights during removal.
j
FUNC (function) button and indicator
When the tape transport control buttons are
pressed with this button held down, the functions
of the buttons change.
For details, see “
qa
Tape transport control buttons”
(see page 21).
When the HOME button is pressed with this
button held down, switches the display at the
bottom of the HOME screen.
For details, see “Display” (page 24).
Control Panel