12
25. Pull out the harness (DC-OUT) from the main body.
26. Remove the two screws, and then remove the DC OUT cover and the harness (DC-OUT) from the DC OUT holder.
27. Attach the harness (DC-OUT-POWER) and the DC OUT cover to the DC OUT holder with two screws.
When attaching the DC OUT cover, align the two bosses with the two holes.
Harness (DC-OUT) assembly
Harness (DC-OUT)
DC-OUT holder
PSW2 x 5
DC-OUT cover
Harness (DC-OUT POWER)
DC-OUT holder
Connector terminal (brown)
Connector terminal (white)
PSW2 x 5
DC-OUT cover
Hole
Boss
Boss
Hole
Note
Summary of Contents for HKC-WL50
Page 17: ...15 34 Attach the SW 1742 board and then tighten the screw PSW3 x 6 SW 1742 board ...
Page 24: ...22 13 Attach the rating label to the camera body Rating label ...
Page 26: ...24 Revision History Date History Contents 2019 3 1st Edition 9 932 686 01 ...
Page 28: ...HKC WL50 SY J E 9 932 686 01 Sony Corporation Printed in Japan 2019 3 08 2019 ...