10
17. Remove the screw, and then remove the SW-1742 board.
18. Remove the two screws, and then remove the DC IN connector.
19. Turn the DC IN connector 180 degrees in the direction of the arrow.
20. Attach the DC IN connector with the two screws.
When attaching the DC IN connector, pay attention to its orientation.
SW-1742 board
M2.6 x 5
M2.6 x 5
DC IN connector
Note
DC IN connector
DC IN connector
M2.6 x 5
M2.6 x 5
Summary of Contents for HKC-WL50
Page 17: ...15 34 Attach the SW 1742 board and then tighten the screw PSW3 x 6 SW 1742 board ...
Page 24: ...22 13 Attach the rating label to the camera body Rating label ...
Page 26: ...24 Revision History Date History Contents 2019 3 1st Edition 9 932 686 01 ...
Page 28: ...HKC WL50 SY J E 9 932 686 01 Sony Corporation Printed in Japan 2019 3 08 2019 ...