Sony HKC-7080, Installation And Maintenance Manual

Page: 38 / 92

3-16 (E)
HKC-7080
3-1-6. SYS Config Menu
The SYS Config menu is used to set operating mode of the tally lamps or to make adjustments of limited
service.
To activate the SYS Config menu, first display the TOP menu.
Page Ver. Item Settings Contents
Tally Own Call R, F&R , Off Selects whether tally lamps are lit or not, or which tally lamp is
lit when the CALL switch on the rear panel is pressed (This
setting is valid only when the HDCU is connected to the
camera. When the camera is used alone without being
connected to RCP/MSU, this setting is turned off regardless of
the menu indication )
R:
One or two rear tally lamps
h)
are lit
R&F: Both rear
h)
and front
k)
tally lamps are lit
OFF: No tally lamp is lit
F Tally RVS
[On]
, Off Tally lamps stay lit while the tally signal is input from the HDCU
or VTR
This item selects the operating mode of the tally lamps when a
CALL button of MSU or RCP is pressed while lit
On: Both rear
h) and front k) tally lamps go out
Off: Rear h) tally lamps alone go out
(Back Tally)
R Tally
[On]
, Off Turns on and off the function to light up the back tally lamp
when the R tally singal is input
G Tally
[On]
, Off Turns on and off the function to light up the back tally lamp
when the G tally singal is input
Up Tally Level 0 to 10 (
[5]
) Sets the intensity of the up tally lamp
Filter CTRL
[Lock]
, Unlock Lock: ND/CC filter cannot be selected when the R tally signal
is input
Unlock: ND/CC filter can be selected even though the R tally
signal is input
Pixel Auto Throw MENU SELECT Starts to automatically correct RPN (Activates APR function )
switch to ENTER to execute
REF DC 00 to FF (
[80]
) Sets the APR detection level
Manual R Throw MENU SELECT Enters a manual correction mode for RPN
Manual G switch to ENTER to execute
Manual B
APR at ABB On,
[Off]
Turns on and off the function to activate the APR each time the
black balance is automatically performed
h) Rear tally lamp refers to back tally lamp and VF tally lamp (of HDVF-700).
k) Front tally lamp refers to up tally lamp and lens tally lamp.
3-1. Setup Menu
3-1-6. SYS Config Menu