Sony HKC-7080, Installation And Maintenance Manual

Page: 30 / 92

3-8 (E)
HKC-7080
Page Ver. Item Settings Contents
Knee 1 Point R/G/B/M
_
99 to 99 (
[0]
) Adjusts the R, G, B or master knee point level when the auto
knee function is turned off
Slope R/G/B/M _ 99 to 99 (
[0]
) Adjusts the R, G, B or master knee slope level when the auto
knee function is turned off
W.CLP R/G/B/M _ 99 to 99 (
[0]
) Adjusts the R, G, B or master white clip level
Knee
[On]
, Off Turns the knee correction circuit on and off
Auto Knee On,
[Off]
Turns the auto knee function on and off
White Clip
[On]
, Off Turns the white clip function on and off
Test
[Off]
, 1, 2 Selects the TEST signal
Off: No test signal is output
1:
Outputs the sawtooth waveform test signal
2: Outputs the 3-step waveform test signal
Clear Throw MENU SELECT Resets numeric settings on the Knee 1 page to 0
switch to ENTER to execute (When you throw MENU SELECT switch to ENTER, the “Clear”
indication flashes. Throw MENU SELECT switch to ENTER
again to execute; throw to CANCEL to cancel)
Knee 2 Knee Saturation On,
[Off]
Turns the knee saturation function on and off
Knee SAT Level _ 99 to 99 (
[_99]
) Adjusts the knee saturation level
Super Skin Knee On,
[Off]
Turns on and off the function to improve the color reproduction
of a skin color in a highlight shot scene
Test
[Off]
, 1, 2 Selects the TEST signal
Off: No test signal is output
1:
Outputs the sawtooth waveform test signal
2: Outputs the 3-step waveform test signal
Clear Throw MENU SELECT Resets numeric settings on the Knee 2 page to 0
switch to ENTER to execute (When you throw MENU SELECT switch to ENTER, the “Clear”
indication flashes. Throw MENU SELECT switch to ENTER
again to execute; throw to CANCEL to cancel)
Detail 1 Detail
[On]
, Off Turns on and off the function to improve resolution by adding
the detail signal
Level _ 99 to 99 (
[_60]
) Adjusts the master level for the detail signal
Limiter _ 99 to 99 (
[0]
) Adjusts the clipping level against the maximum detail level
Crispening _ 99 to 99 (
[_25]
) Adjusts the level at which the detail signal is crispened
H/V Ratio
_
99 to 99 (
[0]
) Adjusts the mix ratio of H and V detail signals
Frequency _ 99 to 99 (
[0]
) Adjusts the boost frequency for H detail signal
Level DEP
_
99 to 99 (
[25]
) Adjusts the level to control the detail signal used at lower signal
level
Level DEP
[On]
, Off Turns the level dependence function on and off
Clear Throw MENU SELECT Resets numeric settings on the Detail 1 page to 0
switch to ENTER to execute (When you throw MENU SELECT switch to ENTER, the “Clear”
indication flashes. Throw MENU SELECT switch to ENTER
again to execute; throw to CANCEL to cancel)
3-1. Setup Menu
3-1-2. Paint Menu