2-4
MFS-2000 IM
2-3-2. Installing Connector Board
1.
Remove the two screws and remove the blank panel.
m
.
To install the connector board into the slot in which
the other board is installed already, loosen the two
fixing screws and remove the connector board
installed already.
.
Store the removed blank panel in a safe place.
2.
Insert the connector board horizontally level and
secure it with the two fixing screws.
Option model name
Board name
Installation slot
(rear side)
MKS-2110M
CN-2486 board
5
MKS-2440
CN-2535 board
6
Blank panel
B3
x
5
B3
x
5
Fixing screw
Connector board
Fixing screw
2-3-3. Installing HK-PSU02
The HK-PSU02 is used in the processor.
c
Before installing an HK-PSU02 in processor, set the
POWER switch of the HK-PSU02 to the “O” position
(OFF).
1.
Turn off the main powers of the processor and discon-
nect the AC power cords from the outlet.
2.
Remove the front panel. (Refer to Section 2-2.)
3.
Remove the two screws that secure the blank panel
and remove the blank panel.
n
Store the removed blank panel in a safe place.
4.
Insert the HK-PSU02 securely into the deep end.
5.
Secure the HK-PSU02 with the two screws, which are
removed in the step 3.
6.
Reinstall the front panel.
2-3-4. Installing BZS-2000M/2440M/2470M
For the installation procedure of the software options BZS-
2000M/2440M/2470M, refer to the MFS-2000 System
User’s Guide.
Blank panel
PSW3
x
6
PSW3
x
6
Summary of Contents for HK-PSU02
Page 4: ......
Page 34: ......
Page 48: ......
Page 60: ...Printed in Japan Sony Corporation 2005 8 16 2004 MFS 2000 C SY E 3 838 833 03 ...
