40
model name1[MZ-DH710] model name2[MZ------]
[2-593-570-
11
(1)]
masterpage:Left
filename[E:\SONY PA\5249_DH710\DATA
DH710\J9050107_2593570111DH710_GB\2593570111\01GB-MZDH710\040OPE.fm]
There is no R-
channel sound
output when
playing a track
recorded from a
cassette deck or
through an
amplifier, or when
listening to sound
from a cassette deck
or amplifier.
• There is no R-channel output if the cassette deck or an amplifier is
connected with a monaural cord.
,
Make sure to use a stereo connecting cord. If, however, the
connected equipment is monaural, there will be no R-channel
sound output even with a stereo connecting cord.
The player cannot
play MP3 tracks.
• You tried to play a MP3 track which format is not supported by this
player.
,
This player only supports MP3 tracks (MPEG-1 Audio Layer-3/
sampling frequency 44.1 kHz) that have been transferred using the
SonicStage software.
Symptom
Cause/Remedy
While using group function
Symptom
Cause/Remedy
The group function
does not operate.
• While using a disc without group setting, an attempt was made to select
some group-related menu.
,
Use a disc with group setting.
A new group cannot
be created.
• This is due to the MiniDisc system limitations (in MD mode only).
Group information has been written to the area where the disc name is
stored. The disc name and track names are recorded in the same area,
which can store a maximum of approximately 1,700 characters. If the
total number exceeds this amount, it is impossible to make group
settings.
020REG.book Page 40 Wednesday, March 16, 2005 1:57 PM