model name1[MZ-DH710] model name2[MZ------]
[2-593-570-
11
(1)]
masterpage:Right
filename[E:\SONY PA\5249_DH710\DATA
DH710\J9050107_2593570111DH710_GB\2593570111\01GB-MZDH710\040OPE.fm]
33
1
Insert a recordable disc into the
player.
2
Make connections as follows.
1
Connect the dedicated USB cable to
the player and to the computer.
2
Make sure the player is stopped and
HOLD is released.
3
Check the connections.
When the connections have been
properly made, “PC – –MD” appears
in the display.
When you unplug the
dedicated USB cable from the
computer or remove the disc
from the player
Be sure to remove the player or the disc as
follows. If not, damage to the data may
occur.
1
Make sure that “REC” is not
displayed in the display window of
the player.
2
Press
x
on the player.
“EJECT DISC OK” appears in the
display.
Depending on the conditions, it may
take some time until “EJECT DISC
OK” appears in the display.
3
Unplug the dedicated USB cable
from the computer or remove the disc
from the player.
•
If you use the player connected to the
computer, it is recommended that you insert a
new alkaline dry battery as a precaution
against power failures, disconnection of the
dedicated USB cable or other unforeseen
occurrences. We do not assure the results
should there be a mis-operation, transfer
failures, or destruction of audio data caused by
unforeseen occurrences.
•
If you disconnect the dedicated USB cable
from the player and want to reconnect it, make
sure to wait at least 2 seconds before
connecting it again.
•
Make sure to place the player at a stable,
vibration-free place during recording.
•
Make sure not to connect the player to your
computer during playing.
•
The system may malfunction if your computer
changes to system suspend, sleep, or
hibernation mode while connecting to the
player. Make sure to disable any changes to
suspend, sleep, or hibernation mode.
•
Make sure not to connect the player and the
computer through a USB hub.
•
When the player is connected to a computer,
power (bus power) is supplied to the player
through the computer’s USB port. If the
computer (a laptop PC, for example) is
operating on battery power, this connection
may cause the computer’s battery to drain. It
is thus recommended to use the computer with
an AC power adaptor.
•
We do not ensure trouble-free operation on all
computers that satisfy the system
requirements.
Notes
020REG.book Page 33 Wednesday, March 16, 2005 1:57 PM
