20
Attaching to the Camera
Attaching to the Camera
Attach the V-shaped shoe attachment to the top of the
camera, then attach the viewfinder to the V-shaped shoe
attachment.
• Before attaching the viewfinder to or removing it from a
camera, always be sure to lock the viewfinder in the
standard (top) position.
• Before removing the viewfinder from the camera, be
sure to lock the tilt lock of the tripod. Grasp the
viewfinder firmly when removing, and be careful not to
drop it or the camera.
For more information about adjusting the viewfinder
position, see “Adjusting the Position” on page 21.
1
Remove the four plastic caps, then use the supplied
hexagonal key and the hexagonal socket head screws
(4
×
12, four screws supplied) to attach the supplied V-
shaped shoe attachment to the top of the camera.
2
Turn the friction adjustment/lock lever clockwise to
lock the viewfinder.
Mount the viewfinder firmly in the V-shaped shoe
attachment.
There is an audible click when the viewfinder snaps
into the attachment.
3
Connect the viewfinder’s camera connector to the
camera’s viewfinder connector using the supplied
connecting cable.
Clamp the connecting cable in the clamper as shown
in the following figure.
Removing the viewfinder
Turn the friction adjustment/lock lever clockwise to lock
the viewfinder.
Remove the viewfinder from the attachment by pushing
the button while pulling the lever.
Notes
Plastic cap
Hexagonal socket
head screw
(4
×
12, supplied)
V-shaped shoe
attachment (supplied)
Clamper
CAMERA
connector
To the camera's
viewfinder connector
Button
Lever
