21
Adjusting the Position
Adjusting the Position
Before moving the camera with the viewfinder attached,
always pull the viewfinder up to the standard (top) position
and push the friction adjustment/lock lever towards the
camera lens to lock the viewfinder. Also, check to be sure
that lift-lock release knob 1 is locked in the “LOCK”
position.
Adjusting the Height
1
Turn lift-lock release knob 1 in the direction of
“RELEASE” until it will not go further, to unlock the
lifting mechanism.
2
Holding the viewfinder firmly, pull lift-lock release
knob 2 and move the viewfinder to the standard (top)
position, middle position, or low position.
There is an audible click when the viewfinder snaps
into the position.
3
Be sure to always turn lift-lock release knob 1 to the
“LOCK” position to lock the lifting mechanism.
The viewfinder snaps into place at the standard (top)
position, middle position, or low position.
Note
2
1
90
90
90
60
90
60
Lift-lock release knob 2
Lift-lock release knob 1
Standard (top) position
Middle position
Low position
Note
