8
g
SDI 3 connector (BNC-type)
For HD PROMPTER signal output. Available only when
connecting a camera control unit with an HD PROMPTER
input connector.
h
CALL button
When this button is pressed, the red tally lamp of the
RCP-1000 series or later Remote Control Panel or the
MSU-1500/1000 series Master Setup Unit will light. Use to call
the operator of the RCP or MSU.
You can also assign other functions to this button, using the
menu displayed on the viewfinder screen.
Operation panel
a
INTERCOM 1 and INTERCOM 2 controls and switches
There are separate PGM1 and PGM2 controls, line select/
receive MIX select switch, LEVEL/MIC switch, and INCOM
level control for both intercom line 1 and intercom line 2.
PGM1 (program 1) control
Adjust the audio listening level of program 1.
PGM2 (program 2) control
Adjust the audio listening level of program 2.
LEVEL/MIC switch
REAR/ON:
The intercom headset microphone is turned
on. The intercom audio listening level is adjusted
with the INCOM level control.
REAR/OFF:
The intercom headset microphone is turned
off. The intercom audio listening level is adjusted
with the INCOM level control.
FRONT/OFF:
The intercom headset microphone is turned
off. The intercom audio listening level is adjusted
with the INCOM level control and the INTERCOM
LEVEL control on the front of the camera
INCOM (intercom) level control
Adjust the intercom audio listening level.
Line select / Receive MIX select switch
Select the intercom line.
PROD:
Use the producer line.
ENG:
Use the engineer line.
MIX:
Receive mixed PROD/ENG audio. Select the
intercom talk line from the menu.
The default intercom line setting is ENG.
b
LIGHT switch
Set to ON to illuminate the operation panel.
c
RET/ASSIGNABLE button A, B
Press the button to switch the function assigned to the button
on the <REAR FUNCTION ASSIGN> page on/off. When the
return function is assigned, press the button to display the
return video signal on the viewfinder screen while the button is
pressed.
Turn the button to change the assigned function setting. When
the return function is assigned, you can change the return
signal channel.
d
RET/ASSIGNABLE button C / DISP/MENU switch
Press the button to switch the function assigned to the button
on the <REAR FUNCTION ASSIGN> page on/off. When the
return function is assigned, press the button to display the
return video signal on the viewfinder screen while the button is
pressed.
Turn the button to change the assigned function setting. When
the return function is assigned, you can change the return
signal channel.
When the DISP/MENU switch is set to the MENU position to
display the MENU screen, you can perform menu operations
using RET/ASSIGNABLE button C.
Connector panel
a
EARPHONE jack (4-pole mini jack)
Connect to a headset, or earphones with microphone (3-pole/
4-pole earphones), to input/output the intercom audio signal.
OFF
PGM1
PGM2
LEVEL
REAR
INCOM
MIC
ON
FRONT
PROD
ENG
MIX
OFF
PGM1
PGM2
A
B
C
RET/A
SS
IGNABLE
LEVEL
REAR
INCOM
DI
S
P
MENU
MIC
ON
FRONT
LIGHT
ON
OFF
PROD
ENG
MIX
OFF
PGM1
PGM2
LEVEL
REAR
INCOM
MIC
ON
FRONT
INTERCOM 2
INTERCOM 1
PROD
ENG
MIX
OFF
PGM1
PGM2
LEVEL
REAR
INCOM
MIC
ON
FRONT
PROD
ENG
MIX
a
b
c
d
PGM1 control
PGM2 control
Line select / Receive
MIX select switch
INCOM level control
LEVEL/MIC switch
PROMPTER
TEST
OUT
LINE
+48V
OFF
MIC
SDI
MONI
AUDIO IN
CH1
CH2
/GEN
LOCK
LINE
+48V
OFF
FRONT MIC
MIC
EARPHONE
RET CTRL
DC IN 10.5-17V
DC OUT
CRANE
TRACKER
REMOTE
AES/EBU
a
b
c
d
e
f
g
h
i
j
k
l
m
