21
Attaching procedure of the BKW-401
1
Turn the arm of the rotation mechanism assembly of
the BKW-401 in the direction of the arrow in the
following illustration.
Next, using a hexagonal wrench 3 mm across flats,
remove the bolts (M4
×
8) together with the washers,
to separate the rotation mechanism assembly from
the viewfinder front-back positioning mechanism
assembly.
2
In the same manner as step 1, remove the viewfinder
shoe of the camera from the front-rear positioning
mechanism.
3
Using the two bolts (M4
×
8) and the washers removed
from the camera in step 2, attach the rotation
mechanism assembly of the BKW-401 to the camera.
4
Adjust the front-rear position so that the camera
handle does not interfere when you rotate the BKW-
401 arm upwards.
Attaching the Cable Clamp Belt
(Supplied)
You can secure the camera cable to the camera by attaching
the supplied cable clamp belt.
1
Insert the belt bracket into hole
A
or
B
of the cable
clamp belt.
2
Remove two +B3
×
5 screws and a blind screw shown
in the figure below from the camera.
D
D
Hexagon
socket bolts
(M4
×
8)
D
Not to interfere
A
B
Belt bracket
Blind screw
+B3
×
5 screws
